Rack mount 24v 48v 56v Passive Gigabit PoE Injector Panel 12 Port
FEATURES
10/100/1000M Gigabit Ethernet;
Flexible power (DC 24V TO 57V) purchased seperately based on CPE needs;
Per Port Current Protection (650mA+/-15%);
Built-in LED Indicator;
19’’ Rack 1U
OVERVIEW
The 12 port gigabit PoE panel is used 10/100/1000M Ethernet, The upper RJ45 sockets is for data in (1/2&3/6&4/5&7/8 are transmitting data). The lower RJ45 socket (labelled power +data) is to deliver data and power:(1/2&3/6&4/5&7/8 transmitting data,1/2(-)&3/6(+)for power).
The Rackmount Injector is composed of 12 sets of Rj45 sockets and two 12-60V DC power jacks. Input power requires 120W (or more) DC power. The DC input pin diameter is 2.1mm and the OD id 5.5mm.
Each socket provides protection against short overflow (current protection 650mA+15%-15%).
The sum total output power must be lower than the MAX input power of your AC-DC power converter.The recommended formula for the DC power supply is 10W per RJ45 output port. For example, 12 x 10W = 120W for full 12 port Passive PoE panel.
The configuration size of panel is 1U (height), 19” (width) and 52mm (thickness), as is available to answer market demand and convenient to be installed directly.
LED Indicator
1-4 RJ45 Socket | LED 1 | 5-8 RJ45 Socket | LED 2 | 9-12 RJ45 Socket | LED3 |
Port current 0-20ma | off | | Off | | Off |
Port current 0-400ma | Green | | Green | | Green |
Port current >400ma | Red | | Red | | Red |
SPECIFICATIONS
Input/Output 24V~48V(up to 56V)
Data 1/2&3/6&4/5&7/8
Power 3/6+ & 1/2- ; 4,5+ & 7,8-
Data In Connects PC/HUB/Switch
Weight 12 Port 1.2Kg
Dimensions 482.6mm×44.3mm×52mm
Case of material metal work material
Ethernet Cable TIA/EIA 568 Cat. 5
Data rate 10/100/1000Mbps
Connector RJ-45
Operating Temperature 0°C ~ 40°C
Storage Temperature -40°C~+70°C
Operating Humidity 10%~80%RH
Storage Humidity 5%~90%RH
Certification CE
This product was added to our catalog on Wednesday 13 May, 2015.