04-802-7800

Power over Ethernet (POE)

  • 24V 0.8A Power Supply for Mikrotik (suits most devices with no PoE Out)
    24V 0.8A Power Supply for Mikrotik (suits most devices with no PoE Out)
    24volt DC 0.8 Amp Plugpack, suits LHG5, RB951G, WAP AC,  etc. (N.B For RB3011, hAPAC, hAPAC Lite and other routers featuring a PoE Out port please use 371-28POW) 24volt DC 0.8 Amp Plugpack, suits LHG5, RB951G, WAP AC,  etc. (N.B For RB3011,...
  • 24V PoE Injector 1660mA
    24V PoE Injector 1660mA
    High Power 24v PoE Injector 1660mA (IEC cable not included). This will power any passive PoE 24V device such as Mikrotik routerboards. High Power 24v PoE Injector 1660mA (IEC cable not included). This will power an...
  • 48 to 24V Gigabit PoE Converter
    48 to 24V Gigabit PoE Converter
    This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.  Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).  You can power it with virtually any 42-57V PoE solutions... This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE,...
  • CRS112-8P-4S-IN
    CRS112-8P-4S-IN
    CRS112-8P-4S-IN is an eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps. CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack... CRS112-8P-4S-IN is an eight Gigabit RJ45 ports PoE switch, that offers different...
  • CRS328-24P-4S+RM
    CRS328-24P-4S+RM
    CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case... CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet por...
    $1,090.00 + GST

  • hEX RB960PGS PoE
    hEX RB960PGS PoE
    The hEX PoE is a five port gigabit ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable... The hEX PoE is a five port gigabit ethernet router for locations where wireless...
  • Mikrotik Passive Gigabit PoE Injector
    Mikrotik Passive Gigabit PoE Injector
    Passive PoE Injector Base for Gigabit devices (RB751G-2Hnd etc). PSU not included. This uses the PSU usually supplied with the RB751G-2HnD etc. Passive PoE Injector Base for Gigabit devices (RB751G-2Hnd etc). PSU not inclu...
  • Passive PoE Injector RBPOE
    Passive PoE Injector RBPOE
    Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.  For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate... Low-cost passive PoE base unit for powering passive PoE devices over ethernet. S...