Your cart is empty.
Mikrotik
-
S+AO0005 Active Direct Attach Cable 5M
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003) 5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective... -
S+RJ10 6-speed RJ-45 module for up to 10 Gbps
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next... This unique module opens up a whole world of high speed connectivity possibiliti... -
S-GPON-ONu SFP Module
MikroTik has announced his first GPON module at MUM Brazil 2015. It allows any RouterBOARD device with SFP cage to be used for Fiber to Home installations without any special modems or software. A plug and play solution means you simply plug it into your device, and no special configuration is needed. It is supported by all our SFP products, with any RouterOS version - all configuration will be... MikroTik has announced his first GPON module at MUM Brazil 2015. It allows any R... -
S31DLC20D 1.25GB 20Km 1310nm Single mode
S-31DLC20D S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. S-31DLC20D S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector... -
S35-53LC20D SFP Module (Pair)
S-35/53LC20D S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM. Units are tested and compatible with... S-35/53LC20D S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25... -
S85DLC05D 1.25GB SFP 550m 850nm
S-85DLC05D S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. S-85DLC05D S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector,... -
SFP Gbps Copper Module
S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Compatability Chart NB: Not compatible with CRS226-24G-2S+ or CRS210-8G-2S+ Product specifications Product code: S-RJ01Data Rate: 1.25GbpsDistance: 100mConnector: RJ45Operating Temperature 0 C +85 C S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ... -
SMA to SMA Cable
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables) 1m SMA male to SMA male cable, that can be used to connect your LTE card (with ...